MF-002 Formaldehyde Remover
(Formaldehyde catcher A: Catalyst B=1:1)
Specification
In the process of fabric production, in order to maintain the special effect of printing dyes, often causes formaldehyde residue in fabrics and clothing.
This product can completely eliminate the formaldehyde residue in various textiles, and has no effect on the appearance and physical and chemical properties of textiles. The formaldehyde content of textiles is reduced to 10ppm or even lower to meet the international and domestic standards.
It can be miscible with a variety of textile finishing auxiliaries without affecting the effect of auxiliaries.
Property
| Item |
Formaldehyde catcher A |
Catalyst B |
| Appearance |
White powder |
Water-based transparent liquid |
| Composition |
Higher molecular organic resin |
high-performance catalyst |
| PH Value(1%water solution) |
7±0.5 |
7.5-8.5 |
| Water solubility |
Soluble in water |
Mixed with water at any ratio |
Usage&Process
| Formaldehyde pollution degree(ppm) |
Recommend dosage(%) |
Operation process |
| 100 |
0.5-1 |
The formaldehyde catcher A and catalyst B were dissolved in water at ratio of 1:1; using padding process, and then high temperature baking (150 ºC-180 ºC) x 2 minutes; or even spray (dosage about 10%) |
| 200 |
1-2 |
| 400 |
2-4 |
| 500 |
2.5-5 |
| 800 |
4-8 |
| 1000 |
10 |
Note: The typical recommended dosage and usage as above, free formaldehyde can be reduced by more than 90%, reduced to the level of 10ppm or even 0ppm,excessive serious textiles can appropriately increased dosage.
Notice
* The baking temperature should be above 150ºC, otherwise the catcher will not react with formaldehyde. Catalyst can reduce reaction time.
* When spray this product as evenly as possible, the place that can not be sprayed will influence the formaldehyde removal effect
* This product should be stored in the shade and cool place; need sealed storage
Audited Supplier 
){kind=link}